5 FELIX PRO 2 TOUCH

Pros
Operation of printer is simple. Cloud based Formide and Slicer for storage, access and slicing files. Multi material printing ability.

Cons
Open structure leading the possibility of external temperature interference.



Design and Features

Felix pro 2 Touch is professional and smart 3D printer with bunch of featured incorporate in it. The design and construction reveals the idea of only using the possible and appropriate components and materials to ensure optimal and better 3D printing experience. Those who are in learning stage also been helped by Felix pro 2 touch which is also known for reliable and upgradable printer. The interchangeable full metal hot ends and the Neodymium magnets are integrated to make sure that the easily replaceable hot-end is snapped firmly in its place. The complete 3D print ecosystem helps you concentrate on the print object not on the print process. You can easily transfer it from one place to other just by holding it in one hand or can carry it easily by rotating the bed assembly and detaching the foot. The automatic calibration is an innovating bed leveling and probing mechanism feature.

The Foldaway dual head system will never create collision with and leakage from the extruder that is not used for printing. The sensors that are used are highly accurate and the printer is completely controllable. The 4.3 inch touchscreen control panel has user intuitive interface powered with wireless connectivity which is achieved through online platform Formide. The aluminum sandwich heat plate is designed to be easily removable from its place and is firmly held with three strong magnets. The online formide platform can be accessed across devices and is also integrated with the touch control panel which enables you to monitor and control all your print jobs and the queues from any web enabled device.

All your files can be stored, organized, and accessed from printer and also from any web enabled device due to proper synchronization. The cloud slicer Katana is well optimized and built-in for dual extrusion and creates slice profiles that is apt for the printer to have clear multi-material prints. This printer runs at a noise level of just 34dBA because of 32 bit processing power. The filament flow detection helps you avoid improper print models whereas if the flow of filament to hot end is not as expected by the printer, the print job will be paused and after some manual process you can continue the job where it is left off. The multi material printing was accurate by the option of printing with soluble support material and the provided design freedom.

Filament and Connectivity

The connectivity options offered for you are USB connection, USB port, Wi-Fi and you are also provided with SD card. You can use any type of filament from any of the suppliers, and the filaments that are recommended by the Felix are PLA, PETG, ABS, and PVA.

Customer Care

You have limited warranty of 12 months excluding hot-ends. You have expert technical support through various ways including email, phone and Skype. The online support articles, manuals, FAQ, manuals, and tips and tricks are published and are easily available for you. They also offer you the delivery on the week you ordered the printer.

  • Printer size: 430x390x550 mm
  • Weight: 11.5kg
  • Build volume: 237 x 244 x235 mm

Printer and Printing Properties

  • Print Technology: Fused Filament Fabrication
  • Weight: 12Kgs
  • Layer resolution: 250 microns (Low), 200 microns (Normal), 150 microns (High), 100 microns (Very High), 50 microns (Extreme).
  • Build plate: Quick swap, magnetic detachable heated bed and up to 105 °C
  • Build plate leveling: Fully automatic motorized
  • Print head: Quick swap hot-end
  • Build speed: 0.35mm nozzle up to 18 mm3/s (ABS @ 250°C)
  • Print head travel speed: Up to 450mm/s
  • Filament feeder type: Direct geared extruder
  • Nozzle diameter: 0.35 standards and optional 0.5 mm
  • Nozzle amount: 2 nozzles, with intelligent dual head nozzle system.
  • XYZ resolution: XY, 13 microns and Z: 04 micron
  • XYZ typical print accuracy: +/- 0.1mm for objects up to 100mm
  • Nozzle temperatures: Up to 275 °C
  • Nozzle heat up time: Approx 1 min @ 200 °C
  • Build plate heat up time: Approx 1.5 min to 60 °C
  • Operation sound level: 34 dBA

Materials

  • System:                Open filament system, use filament from any supplier
  • Filament diameter: 1.75mm
  • Supported materials: Recommended: PLA, PETG, ABS,PVA
  • Specials: Any filament which melts under 275 °C

Requirements

  • Software: Simplify3D or FELIX builder
  • Optional: Repetier-Host, freely downloadable (open source)
  • Supported OS: Windows 7 and upwards, Mac OS X, Linux (repetier-host)
  • Supported file types: STL
  • Printer communication: USB, and Standalone via micro SD card (included)
  • Operating ambient temperatures: 15 to 32 °C (60 – 90 °F)
  • Storage temperatures: 0 to 32 °C (Input                100 - 240V 4A, 50-60Hz 221 W max.)
  • Felix Pro 2 touch review
  • Felix Pro 2 touch review
  • Felix Pro 2 touch review
  • Felix Pro 2 touch review
  • Felix Pro 2 touch review